Aurora dual rotor crusher model 16x24 manual feed hoppers

Bale Granulator This unique system accepts whole bales of synthetic or natural rubber, grinding them down as fine as 1/4"(6mm) in a single pass. Capacities range from 500 to 4,000 kg. per hour.

The Jacobson Bale Granulator uses less power t

Dual Rotor Crusher

The "Dual Rotor Full Nelson" Crusher (DRFNC) is a heavy duty crusher with staggered 1" (25mm) blunt edge hammers or hooked teeth welded on large diameter shafts

Unique Features

Optional sanitary design availabl

Full Nelson Crusher

The single rotor "Full Nelson" Crusher (FNC) is specifically designed to break apart hard or friable materials using either belt or direct drive.

This machine is ideal for hard to break materials such as:

Brak

The "Half Nelson" Crusher (HNC) is a dual rotor machine with intermeshing pins and fixed side wall combs which work together for maximum size reduction. Designed for light to medium duty applications, this machine can accept up to 6" (150mm) size

Lump Buster

The "Lump Buster" (LB) is a heavy duty dual rotor crusher with similar features to the "Half Nelson" (HNC). Excellent for hard, highly abrasive, or high temperature materials.

This machine is ideal for materials such as:

Not just a standard plastics granulator!

This machine features a solid rotor with staggered carbide cutting tips along with a bed knife and screen for the toughest size reduction applications with outputs down to 16 mesh.

Wood Polymer

Alpine Rotoplex Vertical Cutting Mill 50HP Motor This equipment was purchased new in 2005 and has never been used.  It was stored indoors the entire time. 

Feel free to email or call me directly with any questions,

Bale Granulator This unique system accepts whole bales of synthetic or natural rubber, grinding them down as fine as 1/4"(6mm) in a single pass. Capacities range from 500 to 4,000 kg. per hour.

The Jacobson Bale Granulator uses less power t

Dual Rotor Crusher

The "Dual Rotor Full Nelson" Crusher (DRFNC) is a heavy duty crusher with staggered 1" (25mm) blunt edge hammers or hooked teeth welded on large diameter shafts

Unique Features

Optional sanitary design availabl

Full Nelson Crusher

The single rotor "Full Nelson" Crusher (FNC) is specifically designed to break apart hard or friable materials using either belt or direct drive.

This machine is ideal for hard to break materials such as:

Brak

The "Half Nelson" Crusher (HNC) is a dual rotor machine with intermeshing pins and fixed side wall combs which work together for maximum size reduction. Designed for light to medium duty applications, this machine can accept up to 6" (150mm) size

Lump Buster

The "Lump Buster" (LB) is a heavy duty dual rotor crusher with similar features to the "Half Nelson" (HNC). Excellent for hard, highly abrasive, or high temperature materials.

This machine is ideal for materials such as:

Not just a standard plastics granulator!

This machine features a solid rotor with staggered carbide cutting tips along with a bed knife and screen for the toughest size reduction applications with outputs down to 16 mesh.

Wood Polymer

Alpine Rotoplex Vertical Cutting Mill 50HP Motor This equipment was purchased new in 2005 and has never been used.  It was stored indoors the entire time. 

Feel free to email or call me directly with any questions,

Aurora dual rotor crusher model 16x24 manual feed hoppers

TEK rigid hammer delumper/deagglomerator 3 hp motor stainless steel brand new

Rapat underhopper car conveyer eleveates to 36" discharge height

Twin City Industrial Fan 10HP Motor Size - 270 ARR - 9R Type - BAF-SW Serial # - 03-182492-1-1

Feel free to email or call me directly with any questions, comments, or to discuss offers. Be confident, you are working with a 26 y

(2 Available)  Midwest Inner Surge Mixer Bins With Live Bottoms (can be sold separately) Inner Surge Mixers w/ 10 HP drive Serial # - 270499-1-1 Serial # - 270499-1-2 Live Bottoms w/ 5HP drive $23,000 includes both items together. If so

CPM Horizontal Cooler Model HC5D18 Serial # 395621 AS IS - $10,000 Refurbished - $18,000

Feel free to email or call me directly with any questions, comments, or to discuss offers. Be confident, you are working with a 26 year ol

Landers Pellet Mill Model 50 200 HP 1170 RPM 5" Face / Holes 12" face with stiffener rings Die Diam - 20" AS IS - $40,000 Refurbished - $75,000

Feel free to email or call me directly with any questions, comments, or to discuss

Scott Double Ribbon Blender With A Full Drop Bottom Discharge 12" Discharge Screw Bottom Surge Hopper Tub Size : 4.5' Diam x 6' H x 12' L Ribbon Size : 3' 9" Diam x 12' L Chain Drive AS IS - $17,000 Refurbished - $26,000